Choosing the right tank size balances reliability against cost and structural load. This article explains how to carry out water tank capacity calculations for different types of projects.
The basic formula
Storage capacity = daily demand × days of storage + special reserves
Step 1: Estimate daily demand
| User | Typical planning figure |
|---|---|
| Residential (per person) | 50 to 150 litres per day |
| Office (per employee) | 20 to 50 litres per day |
| Day school (per pupil) | 5 to 20 litres per day |
| Boarding school (per student) | 50 to 100 litres per day |
| Hospital (per bed) | 100 litres or more per day |
| Hotel (per guest) | 100 to 200 litres or more per day |
Industrial demand depends on processes and should come from metered data or process design. See pumping capacity.
Step 2: Days of storage
- Reliable mains or grid pumping: around one day
- Solar pumping: one to three days
- Unreliable supply or critical facilities: two days or more
Step 3: Special reserves
- Fire fighting reserves for commercial, industrial and institutional buildings, as required by regulations or insurers.
- Process reserves for industries that cannot stop.
Worked examples
Family home
6 people × 100 L = 600 L/day. With 1.5 days of storage: 600 × 1.5 = 900 L, so a 1,000 L tank, or larger if supply is unreliable.
Boarding school
400 students × 70 L = 28,000 L/day. With solar pumping and two days’ storage: 56,000 L, for example several large tanks or a concrete reservoir.
Small factory
Process use 15 m³/day + staff 2 m³/day = 17 m³/day; one day’s storage plus a fire reserve as required.
Converting to tank dimensions
- 1 m³ = 1,000 litres
- Cylindrical tank volume = π × r² × h
- Rectangular tank volume = length × width × height
Allow for freeboard at the top and dead storage below the outlet.
Structural implications
Every 1,000 litres weighs about one tonne. Larger elevated tanks need stronger towers and foundations. See foundation design and tower height and capacity.
Splitting storage
Large storage is often split between a ground reservoir and a smaller elevated tank, reducing tower cost while keeping reserves.
How Quantum Geoconsultants can help
We size storage, pumping and towers together. See water tower construction and tank sizing for borehole systems.
Frequently asked questions
How do I calculate tank size for my home?
Multiply the number of people by daily use per person, then by the number of days of storage you want.
Should storage include fire reserve?
For commercial and institutional buildings, fire-fighting storage may be required by regulations or insurers and is added to normal storage.
How do I convert litres to tank dimensions?
1 cubic metre equals 1,000 litres. A cylindrical tank's volume is π × radius² × height.
🏗️ Tank and water tower calculator
Work out the tank size you need, the water pressure your tower will give at the taps, and how heavy the full tank will be. That load is what the tower foundation must carry.
Each metre of height gives about 0.1 bar of pressure. Rough planning figures only: the tower and foundation must be designed by an engineer for the tank load, wind and your ground conditions.
Send these numbers on WhatsAppGet a water tower quote
Send us your site location, tank size and the height you need. We will design the tower and foundation and send a quotation, including mobilisation from our Nairobi base.