Elevated water tanks look simple, but they carry heavy loads high above the ground and must resist wind for decades. Good design and construction make them safe and long-lasting. This article explains the key considerations.
Design loads
- Water: about 10 kN per cubic metre (1 tonne per m³).
- Tank and tower self-weight.
- Wind on the tank and tower, the main lateral load.
- Imposed loads from maintenance personnel and equipment.
- Earthquake loads in seismically active areas such as the Rift Valley.
Both full and empty conditions are checked: full for bearing and member strength, empty for uplift and overturning under wind.
Tower forms
Steel lattice towers
Four or more legs of angle, channel or hollow sections, braced diagonally, with a platform for the tank. Quick to fabricate and erect, suitable for plastic and steel sectional tanks.
Reinforced concrete towers
Columns and beams or a shaft supporting a concrete tank. Durable and suited to large capacities and community schemes.
Masonry stands
For small tanks at low heights, sometimes economical but limited in height.
Design standards
Engineers use recognised codes for actions (including wind), steel and concrete design, and liquid-retaining structures, such as the Eurocodes or equivalent British Standards. Kenyan practice commonly follows these.
Key design checks
- Member strength and buckling of legs and braces
- Connection design: bolts, welds and base plates
- Platform beams supporting the tank evenly
- Overall stability against overturning
- Foundation bearing, settlement and uplift. See foundation design.
- Deflection and verticality
Construction quality
- Steel members of the specified grade and size
- Accurate fabrication and hole alignment
- Proper galvanising or paint systems. See corrosion protection.
- Correctly placed anchor bolts and grouted base plates
- Concrete of specified strength, cover and curing
- Plumb and level erection
Access and safety features
- Ladder with safety cage or fall-arrest system
- Platform with guardrails
- Lockable tank access hatch
- Lightning protection and earthing
Plumbing integration
Inlets, outlets, overflows and drains are planned with the structure so pipes are supported and accessible. See plumbing, valves and fittings.
How Quantum Geoconsultants can help
We design and build steel and concrete water towers with foundations based on site investigation. See water tower construction and our water tower guide.
Frequently asked questions
What loads does an elevated tank carry?
The weight of the tank and water, the self-weight of the tower, wind loads, access and maintenance loads, and in some regions earthquake loads.
Steel or concrete tower?
Steel towers are quicker to build and suit small to medium tanks. Reinforced concrete towers suit large capacities and long service life.
Who should design an elevated tank?
A qualified structural engineer, using ground investigation data for the foundations.
🏗️ Tank and water tower calculator
Work out the tank size you need, the water pressure your tower will give at the taps, and how heavy the full tank will be. That load is what the tower foundation must carry.
Each metre of height gives about 0.1 bar of pressure. Rough planning figures only: the tower and foundation must be designed by an engineer for the tank load, wind and your ground conditions.
Send these numbers on WhatsAppGet a water tower quote
Send us your site location, tank size and the height you need. We will design the tower and foundation and send a quotation, including mobilisation from our Nairobi base.