Get a Quote

Borehole Flushing in Garissa

Borehole flushing in Garissa (Garissa town, Dadaab): air-lift flushing, cleaning and rehabilitation to restore lost yield. Mobilisation from Nairobi.

By Quantum Geoconsultants hydrogeology teamUpdated 16 November 20263 min read
Compressor◀ Dirty water & silt out◀ Clogged screen◀ Air line & bubbles◀ Silt at the bottom Scale & sand on screens

Garissa: compressed air lifts silt and dirty water out of the borehole until the screens are clear and the water runs clean.

Borehole flushing in Garissa restores boreholes that have lost water, started pumping sand or turned brown. We clean out silt, scale and iron bacteria with compressed air and surging, then disinfect the borehole and measure the restored yield. This guide explains why boreholes in Garissa lose yield, how we flush them and what affects the cost, including mobilisation from our Nairobi base.

Signs your borehole in Garissa needs flushing

Why boreholes in Garissa lose yield

Boreholes in Garissa draw water from deep sedimentary aquifers, where the water is often hard or mineralised. Over the years, mineral scale builds up on the screens and pump, and sand can enter. Air-lift flushing and surging remove the sand and loose scale, and a camera inspection checks the screens and casing for hard scale and corrosion.

Salty or mineralised water in parts of Garissa speeds up scale build-up and corrosion of screens, casing and pumps. Flushing removes the loose scale, and our camera inspection checks the casing and screens for hard scale and corrosion.

Who we flush boreholes for in Garissa: Town and community water supplies, refugee settlements, livestock watering points, irrigation along the Tana, schools and health facilities.

Borehole flushing methods we use in Garissa

Air-lift flushingCompressed air lifts water, silt and sand out until the borehole runs clear.
SurgingMoves water back and forth through the screens and fractures to break up blockages.
Bailing and silt removalRemoves sand and collapsed material from the bottom of the borehole.
DisinfectionShock chlorination after the work, then a water test before drinking.
Camera inspectionShows the casing, screens, collapse and scale before and after. See camera inspection in Garissa.
Step testMeasures the restored yield so the pump can be matched to it.

How we flush a borehole in Garissa

  1. Review the completion record, the original yield and the symptoms.
  2. Pull the pump and riser and inspect them for wear and deposits.
  3. Measure the depth and water level, and inspect with a camera where needed.
  4. Air-lift flush and surge zone by zone until the water runs clear.
  5. Inspect again with the camera where needed, to confirm the screens and bottom are clear.
  6. Disinfect the borehole by shock chlorination.
  7. Step test to measure the new yield and pumping water level.
  8. Reinstall or resize the pump, then report the before and after results.

If the pump needs replacing, see borehole pump installation in Garissa. It is also a good time to convert to solar: see borehole solar installation in Garissa.

When flushing is not enough

Flushing restores a clogged borehole, but it cannot create water that is not there. If the regional water level has fallen, the pump may need lowering or the borehole deepening. If the casing has collapsed or corroded, it may need relining. If the borehole was badly sited, a new hydrogeological survey in Garissa and borehole may be the better investment. Our measurements tell you which case you are in before you spend more.

Borehole flushing cost in Garissa, including mobilisation

The cost depends on the borehole depth and diameter, the methods needed (air-lift flushing alone, or with surging and a camera inspection), pump removal and reinstallation, the step test and site access.

Mobilisation from Nairobi

We are based in Nairobi, so mobilisation costs change with the distance to your site. Garissa is a moderate distance from our Nairobi base. Mobilisation covers moving the compressor, crew and equipment, plus accommodation while we work. Mobilisation is shown as a separate item in the quotation. Flushing several boreholes in the same area, or combining flushing with pump or solar work, shares one mobilisation.

We flush and rehabilitate boreholes across Garissa, including Garissa town, Dadaab, Masalani, Modogashe, Ijara, Hulugho, Balambala, Bura East.

Frequently asked questions

How much does borehole flushing cost in Garissa?

It depends on the borehole depth, the methods needed (air-lift flushing alone, or with surging and a camera inspection), pump removal and reinstallation, and the step test. Mobilisation from our Nairobi base is moderate, as the county is a fair distance from Nairobi. Send us your borehole details for a quotation.

Why has my borehole in Garissa lost water?

Usually mineral scale on the screens from hard water, or sand entry. Air-lift flushing and surging restore much of the flow, and a camera inspection shows any hard scale left.

How often should a borehole be flushed?

There is no fixed rule. Record the yield and water level every year, and flush when the yield drops noticeably or sand, discoloured water or pump problems appear. Iron-rich and hard-water boreholes usually need it more often.

Will flushing restore my borehole's full yield?

If the loss is caused by clogging, flushing often restores much of it. It cannot fix a falling regional water level, collapsed casing or a badly sited borehole. Our step test after flushing shows the restored yield.

Is the water safe to drink after flushing?

We disinfect the borehole by shock chlorination after flushing. Run the water to waste until the chlorine clears, and have the water tested before drinking.

References and further reading

  1. SSWM: well development and rehabilitation
  2. Global Water Partnership Eastern Africa: Kenya groundwater assessment results (2026)
  3. Barasa M. et al. (2018). Africa Groundwater Atlas: Hydrogeology of Kenya. British Geological Survey
  4. Water Resources Authority: water use allocation and permits

🩺 Borehole health check

Compare your borehole today with its completion record to see how much yield it has lost and how much silt has filled it. The original yield and depth are on the borehole completion record and test pumping report.

0yield lost (%)
0silt in the borehole (m)
0borehole health score (out of 10)

A rough guide only. A camera inspection and a step test after flushing show the real condition of the borehole.

Get a borehole flushing quote in Garissa

Send us the borehole depth, its original and current yield and what the water looks like. We will recommend the right flushing method and send a quotation, including mobilisation from our Nairobi base.

💬 WhatsApp