Get a Quote
← All articles

Sampling Techniques and Quality Assurance in Mineral Exploration

Sampling techniques in mineral exploration, from rock, trench and drill samples to sample preparation, and the quality assurance practices that keep results representative and reliable.

By Quantum Geoconsultants exploration geology teamUpdated 19 November 20262 min read
TopsoilWeathered rock (regolith)Water at base of weathered zoneFractured granite / gneiss Resistivity / IP survey Targets before drilling

⛏️ Mineral Exploration: a technical article by the Quantum Geoconsultants exploration geology team.

Every decision in exploration, from drilling the next hole to estimating a resource, relies on samples. If samples are not representative, everything built on them is wrong. This article covers sampling techniques and the quality assurance that protects them.

Types of samples

Principles of good sampling

Splitting

RC samples are split with riffle, cone or rotary splitters to a manageable size. Splitters must be clean and level. Core is sawn in half along a consistent line, so both halves have similar mineral content.

Sample preparation

At the laboratory, samples are dried, crushed, split and pulverised to a fine powder. Typical specifications require a high percentage of material to pass set sizes after crushing and pulverising. Preparation errors, such as contamination between samples or poor splitting, can be larger than analytical errors.

Analysis

Quality assurance

Quality assurance is everything done to make sampling and analysis right the first time:

Quality control, checking that it worked, uses standards, blanks and duplicates. See QA/QC in mineral exploration.

Sample security

Samples should be stored securely and transported under seal. Documentation should allow every sample to be traced. Security failures can undermine the credibility of an entire project.

Common sampling errors

How Quantum Geoconsultants can help

We design sampling protocols, train field teams and manage sample flows to laboratories. See mineral exploration and core logging.

Frequently asked questions

What makes a sample representative?

It reflects the true composition of the material it comes from, achieved by correct sampling method, adequate size and careful splitting and preparation.

What is chain of custody?

The documented control of samples from collection to laboratory, ensuring they are not lost, mixed up or tampered with.

Why is sample preparation important?

Crushing, splitting and pulverising reduce samples to the small portion analysed. Errors at this stage can be larger than analytical errors.

📡 Request a geophysical survey quote

The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.

We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.

Plan your geophysical survey

Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.

💬 WhatsApp