Get a Quote
← All articles

Diamond Core Drilling: Applications in Mineral Resource Evaluation

How diamond core drilling supports mineral resource evaluation: core sizes, oriented core, density, metallurgical and geotechnical samples, and best practice.

By Quantum Geoconsultants exploration geology teamUpdated 19 November 20262 min read
TopsoilWeathered rock (regolith)Water at base of weathered zoneFractured granite / gneiss Resistivity / IP survey Targets before drilling

⛏️ Mineral Exploration: a technical article by the Quantum Geoconsultants exploration geology team.

Diamond core drilling produces solid cylinders of rock that geologists can see, measure and test. For resource evaluation, it provides information that no other drilling method can match. This article explains its applications.

How diamond drilling works

A rotating bit set with industrial diamonds cuts an annular groove, leaving a core of rock that enters the core barrel. Wireline systems retrieve the inner tube without pulling all the rods, making deep drilling efficient.

Core sizes

Holes often start at a larger size and reduce with depth.

Applications in resource evaluation

Geology and domains

Core reveals lithology, alteration, veining and mineralisation styles, which define the domains used in resource models.

Structure

Oriented core allows measurement of the true orientation of veins, faults and foliation, essential for understanding ore shoot geometry. See structural mapping.

Density

Bulk density is measured on core pieces, usually by water immersion. Density converts volumes to tonnes and errors directly affect resource tonnage.

Metallurgical samples

Core provides representative material for processing tests on recovery and grindability.

Geotechnical data

Recovery, RQD, fracture data and rock strength support pit slope and underground design. See core recovery and RQD.

Verification

Diamond holes twinned with RC holes check for sampling bias.

Best practice

Costs and planning

Diamond drilling costs more per metre than RC, so programmes are designed to use it where its information is most valuable: key sections through the deposit, structural studies, metallurgy and geotechnics. See RC versus diamond drilling.

Diamond drilling in engineering

The same technology is used in geotechnical investigations for foundations, dams and tunnels. See rock core logging.

How Quantum Geoconsultants can help

We supervise diamond drilling and provide core logging, sampling and geotechnical logging. See mineral exploration and geotechnical surveys.

Frequently asked questions

Why is diamond drilling used in resource evaluation?

Core shows geology, structure and mineralisation directly and provides samples for density, metallurgical and geotechnical tests.

What are PQ, HQ and NQ?

Standard core sizes. PQ is largest, then HQ and NQ. Larger core gives better recovery and bigger samples but costs more.

What is oriented core?

Core marked to show its original position in the ground, allowing true orientations of structures to be measured.

📡 Request a geophysical survey quote

The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.

We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.

Plan your geophysical survey

Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.

💬 WhatsApp