A geotechnical survey in Tana River County, also called a soil test or site investigation, tells your engineer what lies beneath your site and how much load the ground can safely carry. In Tana River, the key ground issue is soft floodplain clays. Under the National Building Code 2024, soil testing is now expected before construction.
Engineering geology of Tana River County
Most of Tana River County is flat sedimentary ground: river and delta clays, silts and sands deposited by the Tana. Near the river and in the delta, soils are soft, compressible clays with a high water table, and large areas flood regularly. Away from the river, older sediments can be salty and dark clays can be expansive.
In short: The Tana floodplain is soft river clay and silt with a high water table and regular flooding.
Geotechnical implications for construction in Tana River
- Raise floor levels above flood level and design for scour
- Soft clays may need piles or ground improvement
- Salty soils and water require durable concrete
- Road embankments need settlement checks
Investigations we recommend in Tana River
We use our GY-150 drill rig for core drilling and sampling, with DCP, SPT, CPT, plate load and laboratory testing. See all our geotechnical services and our guide to geotechnical surveys in Kenya.
Laboratory testing: soils, rocks and chemistry for Tana River
Samples from our boreholes and trial pits are tested to recognised standards (BS 1377 for soils and ISRM suggested methods for rock). We select the tests that matter for your ground and structure.
Soil classification
Soil strength and shear
Compaction, permeability and collapse
Rock strength and durability
Chemical tests
Piezometer installation for groundwater monitoring in Tana River
In soft lake and river clays the water table is high and changes with floods, so we install piezometers to record groundwater levels and pore pressures for basement, excavation, dewatering and settlement design.
Piezometers are installed in our investigation boreholes where needed, so groundwater can be monitored before, during and after construction.
Foundation options for Tana River ground
- Piles to firm sand or rock
- Raft foundations for light structures
- Preloading or ground improvement for fills
- Raise platforms above flood level
- Design for buoyancy and high water table
The right choice depends on the test results and the loads from your structure. The geotechnical report gives specific recommendations for your site.
How much does a geotechnical survey cost in Tana River?
The cost of a geotechnical survey in Tana River depends on the size and type of structure, the site area, the number and depth of boreholes and tests and the ground conditions. A house on firm ground needs far less work than an apartment block, bridge or industrial yard on difficult soil.
Ask us for a quote. Send your site location and project details and we will propose an investigation programme and quotation.
Areas we cover in Tana River County
We carry out geotechnical surveys and soil testing across Tana River County, including Hola, Garsen, Bura, Madogo, Kipini, Tarasaa, Bangale and Wenje. We also work in neighbouring Garissa, Lamu, Kilifi, Kitui, Isiolo.
Need water on site too? See borehole drilling and hydrogeological surveys in Tana River.
Frequently asked questions
How much does a geotechnical survey cost in Tana River?
It depends on the size and type of structure, the site area, the number and depth of boreholes and tests, and the ground conditions. Contact us with your project details for a quotation.
Is soil testing required before building in Tana River?
Yes. Under the National Building Code 2024, geotechnical assessment is treated as a precondition for construction and is used to set design values such as allowable bearing pressure.
What are the main ground problems in Tana River?
The Tana floodplain is soft river clay and silt with a high water table and regular flooding.
How long does a geotechnical survey take in Tana River?
Fieldwork for a typical building takes from one day to a few days, followed by laboratory testing and the report. Larger or more complex sites take longer.
Which areas of Tana River do you cover?
We work across Tana River County, including Hola, Garsen, Bura, Madogo, Kipini, Tarasaa, Bangale and Wenje, and throughout Kenya.
Which laboratory tests do you carry out for Tana River projects?
We test soils for classification, strength and shear (triaxial, shear box, unconfined compression), compaction, CBR, consolidation and permeability; rocks for UCS, point load, tensile strength and durability; and soil and groundwater chemistry, including pH, sulphate, chloride and organic content.
Do you install piezometers in Tana River?
Yes. Where groundwater matters, we install standpipe or vibrating wire piezometers in our investigation boreholes to monitor groundwater levels and pore water pressures over time.
References and further reading
- Barasa M. et al. (2018). Africa Groundwater Atlas: Hydrogeology of Kenya. British Geological Survey
- Mandatory soil test looms for developers before construction (The Standard)
🏗️ Request a geotechnical survey quote
The scope and cost of a geotechnical investigation depend on the size and type of structure, the site area and the ground conditions. Tell us about your project and we will propose an investigation programme and quotation.
Under the National Building Code 2024, soil testing is now expected before construction. We reply with a proposed programme and quotation.
Book a geotechnical survey in Tana River
Know your ground before you build. Send us your site location and project details and we will propose an investigation programme and quotation.