Get a Quote

Borehole Pump Installation in Machakos

Borehole pump installation in Machakos: submersible and solar pump sizing, installation, repair and WRA metering in Machakos town. Get a quote.

By Quantum Geoconsultants hydrogeology teamUpdated 16 November 20264 min read
TopsoilWeathered rockFractured graniteStatic water level (pump off) Pumping water level ◀ Submersible pump & motor ◀ Screen below the pump Low yield: size to yield

Machakos: water in weathered and fractured basement rock, with modest yields. The pump sits below the pumping water level and above the screen.

Borehole pump installation in Machakos decides whether your borehole delivers reliable water for years or fails within months. A good pump is chosen from the borehole's test pumping result, the local geology and the water quality. This guide explains submersible pump installation in Machakos, how to choose between solar and electric pumps, and what affects the cost.

How Machakos's geology affects your borehole pump

Most of Machakos is basement rock, where yields vary and some boreholes are mildly saline. Match the pump to the tested yield and choose stainless steel pumps and fittings where the water is salty. Around Athi River and Mlolongo, industries often run larger AC submersibles on grid power.

In basement rock (granites and gneisses), groundwater sits in the weathered zone and in fractures. Yields are often modest and drawdown can be large, so the pump's flow must stay within the tested safe yield. Set the pump above the main water-bearing fracture but well below the pumping level, and fit dry-run protection or a level probe. A smaller pump running longer, with a bigger tank, beats a big pump that empties the borehole.

Don't have a borehole yet? Start with a hydrogeological survey in Machakos, then borehole drilling in Machakos. The test pumping at the end of drilling gives the numbers we need to size your pump.

Types of borehole pumps we install

Solar submersible pumpsRun straight from solar panels through a controller. No fuel or power bills.
AC submersible pumpsSingle-phase or three-phase pumps on grid or generator power, for higher flows and around-the-clock pumping.
Hybrid solar and grid pumpsRun on solar by day and switch to grid or generator power when needed.
Booster pumps and pressure setsGive steady pressure from the tank to taps, showers and upper floors.
Pump replacement and upgradesSwap a failed or undersized pump for one matched to your borehole.
Hand pumpsA simple backup on shallow boreholes for homes, schools and community points.

How we install a submersible pump in Machakos

  1. Review the borehole data: depth, casing size, static water level, pumping water level and safe yield from the test pumping report.
  2. Size the pump: work out the total head (lift plus tank height plus pipe friction) and the flow you need, then choose the pump from the manufacturer's pump curves.
  3. Choose the materials: stainless steel pump and motor, riser pipe, drop cable and fittings suited to the depth and water quality.
  4. Install the pump: lower the pump on its riser pipe with a stainless steel safety rope, set it below the pumping water level and above the screen, and fit a non-return valve.
  5. Fit the controls: solar controller or starter panel, dry-run protection, level probe and a float switch in the tank.
  6. Connect the tank and meter: pipework to the tank on its stand and a water meter, as Water Resources Authority (WRA) permit conditions require abstraction to be measured.
  7. Commission and hand over: test the flow and pressure, check the water level while pumping, seal the wellhead and train you on simple care.

Solar or electric borehole pump in Machakos?

Machakos has strong sunshine for most of the year, which makes solar borehole pumps the cheapest way to pump water. A solar pump has no fuel or power bills, and the tank stores the day's water for the evening and night.

Use our pump size calculator below for a first estimate of the solar array or motor size your borehole needs.

Water quality and pump materials in Machakos

Groundwater in parts of Machakos is salty or mineralised, which corrodes ordinary pumps and fittings. Choose stainless steel pumps, motors and fittings designed for aggressive water, with uPVC or HDPE riser pipe instead of galvanised steel where the depth allows.

Submersible pump installation checklist
  • Pump flow within the tested safe yield
  • Pump set below the pumping water level, never on the borehole floor
  • Motor cooled by water flowing past it (use a flow sleeve if needed)
  • Stainless steel safety rope and properly sized drop cable
  • Dry-run protection and a tank float switch
  • Non-return valve and sealed wellhead
  • Water meter fitted, as WRA requires

Borehole pump repair and maintenance in Machakos

We pull, test, repair and replace borehole pumps. Common problems we fix include:

We work across Machakos, including Machakos town, Athi River, Mlolongo, Syokimau, Kangundo, Tala, Matuu, Masii.

What does borehole pump installation cost in Machakos?

The cost depends on the pump setting depth and total head, the flow you need, the power source (solar array or grid), the distance and height to the tank and the water quality, which sets the materials. Send us your test pumping report and site details for a quotation.

Frequently asked questions

How much does borehole pump installation cost in Machakos?

It depends on the pump setting depth, the flow needed, solar or grid power, the distance and height to the tank and the water quality. Send us your test pumping report and site details and we will send a quotation.

Which pump is best for a borehole in Machakos?

In much of Machakos, the best choice is a submersible pump sized to the borehole's tested safe yield, usually solar, with dry-run protection. The final choice comes from your borehole's test pumping result and water quality.

Is a solar or electric borehole pump better in Machakos?

Solar is usually the better choice in Machakos. The strong sunshine means a solar pump can deliver the day's water without fuel or power bills. Grid or generator pumps make sense only for very large demands or where water is needed around the clock.

How deep should a submersible pump be installed?

Below the pumping water level measured during test pumping, with a safety margin for seasonal drops, and normally above the screen so water flows past and cools the motor. Never set it on the borehole floor, where it will draw in silt.

Do I need a water meter on my borehole?

Yes. Water Resources Authority permit conditions require borehole owners to measure the water they abstract, and we install a meter with every pump.

References and further reading

  1. Water Resources Authority: water use allocation and permits
  2. Water Resources Regulations, 2021 (Legal Notice 43 of 2021), Kenya Law
  3. Grundfos Ecademy: pump sizing and installation in domestic groundwater applications
  4. Xylem: 5 mistakes when selecting a borehole pump
  5. Energypedia: Solar Pumping Toolkit, guidance and assessment
  6. Global Solar Atlas: solar resource map for Kenya
  7. The Star (2025): WRA warns of rising illegal water abstraction

⚙️ Borehole pump size calculator

Enter your borehole's numbers from the test pumping report (or your best estimate) to see the total head, the flow and roughly how big a submersible pump or solar array you need.

0total head (m)
0pump flow (m³/hour)
0solar array (watts)

Rough planning figures only. Total head = pumping water level + tank height + an allowance for pipe friction. The final pump is chosen from the manufacturer's pump curves, your test pumping yield and your water quality.

Get a borehole pump installation quote in Machakos

Send us your test pumping report, borehole depth and where the tank will sit. We will size the right submersible or solar pump and send a quotation for supply, installation and commissioning.

💬 WhatsApp