Get a Quote

Borehole Flushing in Kericho

Borehole flushing in Kericho (Kericho town, Litein): air-lift flushing, cleaning and rehabilitation to restore lost yield. Mobilisation from Nairobi.

By Quantum Geoconsultants hydrogeology teamUpdated 16 November 20263 min read
Compressor◀ Dirty water & silt out◀ Clogged screen◀ Air line & bubbles◀ Silt at the bottom Fines & ash in fractures

Kericho: compressed air lifts silt and dirty water out of the borehole until the screens are clear and the water runs clean.

Borehole flushing in Kericho restores boreholes that have lost water, started pumping sand or turned brown. We clean out silt, scale and iron bacteria with compressed air and surging, then disinfect the borehole and measure the restored yield. This guide explains why boreholes in Kericho lose yield, how we flush them and what affects the cost, including mobilisation from our Nairobi base.

Signs your borehole in Kericho needs flushing

Why boreholes in Kericho lose yield

Most boreholes in Kericho draw water from fractures and the layers between old lava flows and tuffs. Over time, fine volcanic ash and weathered tuff wash into these fractures and into the borehole, and long unlined sections can slowly cave in. Air-lift flushing and surging clear the fines and restore the flow. Where many boreholes pump from the same aquifer, the regional water level can also fall. Flushing cannot fix that, so we measure the water level to tell the two problems apart.

Groundwater in Kericho is generally fresh, but every borehole is different. After flushing, we disinfect the borehole and recommend a fresh water test before drinking.

Who we flush boreholes for in Kericho: Tea estates and factories, dairy farms, schools and colleges, hotels, and homes and businesses in Kericho and Litein.

Borehole flushing methods we use in Kericho

Air-lift flushingCompressed air lifts water, silt and sand out until the borehole runs clear.
SurgingMoves water back and forth through the screens and fractures to break up blockages.
Bailing and silt removalRemoves sand and collapsed material from the bottom of the borehole.
DisinfectionShock chlorination after the work, then a water test before drinking.
Camera inspectionShows the casing, screens, collapse and scale before and after. See camera inspection in Kericho.
Step testMeasures the restored yield so the pump can be matched to it.

How we flush a borehole in Kericho

  1. Review the completion record, the original yield and the symptoms.
  2. Pull the pump and riser and inspect them for wear and deposits.
  3. Measure the depth and water level, and inspect with a camera where needed.
  4. Air-lift flush and surge zone by zone until the water runs clear.
  5. Inspect again with the camera where needed, to confirm the screens and bottom are clear.
  6. Disinfect the borehole by shock chlorination.
  7. Step test to measure the new yield and pumping water level.
  8. Reinstall or resize the pump, then report the before and after results.

If the pump needs replacing, see borehole pump installation in Kericho. It is also a good time to convert to solar: see borehole solar installation in Kericho.

When flushing is not enough

Flushing restores a clogged borehole, but it cannot create water that is not there. If the regional water level has fallen, the pump may need lowering or the borehole deepening. If the casing has collapsed or corroded, it may need relining. If the borehole was badly sited, a new hydrogeological survey in Kericho and borehole may be the better investment. Our measurements tell you which case you are in before you spend more.

Borehole flushing cost in Kericho, including mobilisation

The cost depends on the borehole depth and diameter, the methods needed (air-lift flushing alone, or with surging and a camera inspection), pump removal and reinstallation, the step test and site access.

Mobilisation from Nairobi

We are based in Nairobi, so mobilisation costs change with the distance to your site. Kericho is a moderate distance from our Nairobi base. Mobilisation covers moving the compressor, crew and equipment, plus accommodation while we work. Mobilisation is shown as a separate item in the quotation. Flushing several boreholes in the same area, or combining flushing with pump or solar work, shares one mobilisation.

We flush and rehabilitate boreholes across Kericho, including Kericho town, Litein, Londiani, Kipkelion, Sosiot, Fort Ternan, Kapsoit, Chepseon.

Frequently asked questions

How much does borehole flushing cost in Kericho?

It depends on the borehole depth, the methods needed (air-lift flushing alone, or with surging and a camera inspection), pump removal and reinstallation, and the step test. Mobilisation from our Nairobi base is moderate, as the county is a fair distance from Nairobi. Send us your borehole details for a quotation.

Why has my borehole in Kericho lost water?

Usually fine volcanic ash and weathered tuff clogging the fractures, silt filling the bottom, or a falling regional water level. Measuring the water level and depth tells them apart.

How often should a borehole be flushed?

There is no fixed rule. Record the yield and water level every year, and flush when the yield drops noticeably or sand, discoloured water or pump problems appear. Iron-rich and hard-water boreholes usually need it more often.

Will flushing restore my borehole's full yield?

If the loss is caused by clogging, flushing often restores much of it. It cannot fix a falling regional water level, collapsed casing or a badly sited borehole. Our step test after flushing shows the restored yield.

Is the water safe to drink after flushing?

We disinfect the borehole by shock chlorination after flushing. Run the water to waste until the chlorine clears, and have the water tested before drinking.

References and further reading

  1. SSWM: well development and rehabilitation
  2. Global Water Partnership Eastern Africa: Kenya groundwater assessment results (2026)
  3. Barasa M. et al. (2018). Africa Groundwater Atlas: Hydrogeology of Kenya. British Geological Survey
  4. Water Resources Authority: water use allocation and permits

🩺 Borehole health check

Compare your borehole today with its completion record to see how much yield it has lost and how much silt has filled it. The original yield and depth are on the borehole completion record and test pumping report.

0yield lost (%)
0silt in the borehole (m)
0borehole health score (out of 10)

A rough guide only. A camera inspection and a step test after flushing show the real condition of the borehole.

Get a borehole flushing quote in Kericho

Send us the borehole depth, its original and current yield and what the water looks like. We will recommend the right flushing method and send a quotation, including mobilisation from our Nairobi base.

💬 WhatsApp