Get a Quote

Borehole Camera Inspection in Meru

Borehole camera inspection in Meru (Meru town, Maua, Timau): downhole video survey and written report on casing, screens and yield loss.

By Quantum Geoconsultants hydrogeology teamUpdated 16 November 20263 min read
REC · LIVE VIEW Casing jointCrack in casingScreen: slots cloggedSilt at the bottom Monitor & recorder Open hole & fractures

Meru: the camera goes down on a measured cable while the monitor records the casing, any cracks, the screens and the bottom, each logged by depth.

Borehole camera inspection in Meru shows you exactly what is happening inside your borehole. We lower a downhole video camera on a depth-measured cable, record the casing, screens, fractures and bottom, and give you a written inspection report with the video, still images, a depth log and clear recommendations. This guide explains what the camera finds in Meru's boreholes, how the inspection works, what the report contains and what affects the cost, including mobilisation from our Nairobi base.

When you need a borehole camera inspection in Meru

What our camera finds in Meru's boreholes

Boreholes in Meru are often deep, with long open-hole sections in lava below the casing. The camera shows the fractured, water-bearing zones between lava flows, any collapse of soft tuff or weathered layers, and the depth and condition of the casing. It also records the water level, which helps tell a clogged borehole from a falling water table.

High fluoride in parts of Meru does not show on camera. It needs a water test, which we can arrange alongside the inspection.

How we carry out a camera inspection in Meru

  1. Plan: depth, diameter, records and what you need to find out.
  2. Prepare: pull the pump and riser, and let the water settle or flush it if it is muddy.
  3. Measure the static water level and the depth to the bottom.
  4. Inspect: lower the camera slowly, recording continuously, with side views of key features.
  5. Review on site with you, then report with the video, images, depth log and recommendations.

If the water is muddy, the borehole is flushed first: see borehole flushing in Meru. If the pump needs replacing after the inspection, see borehole pump installation in Meru.

Your borehole inspection report

What the report contains
  • Borehole details and the date of inspection
  • Full video recording, with depth shown throughout
  • Still images of key features, labelled with depth
  • A depth-referenced log of casing, joints, screens, water level, inflow zones, damage and silt
  • A comparison with the completion record, where available
  • An overall condition assessment
  • Clear recommendations: no action, flushing, pump recovery, repair, deepening or a new borehole

Checking a new borehole in Meru

A camera inspection compares the borehole as built with its completion record: the total depth, the casing length and type, the screen positions and the joints. It is an independent check on the drilling work, and useful evidence if a borehole fails early. Planning a new borehole? See borehole drilling in Meru.

Borehole camera inspection cost in Meru

The cost depends on the borehole depth, whether we need to pull and reinstall the pump, whether flushing is needed first, the level of reporting and site access.

Mobilisation from Nairobi

We are based in Nairobi, so mobilisation costs change with the distance to your site. Meru is a moderate distance from our Nairobi base. Mobilisation covers moving the camera, crew and equipment, plus accommodation where needed. Mobilisation is shown separately in the quotation. Inspecting several boreholes in the same area, or combining the inspection with flushing or pump work, shares one mobilisation.

We inspect boreholes across Meru, including Meru town, Maua, Timau, Nkubu, Mikinduri, Laare, Kianjai, Githongo.

Frequently asked questions

How much does a borehole camera inspection cost in Meru?

It depends on the borehole depth, whether the pump must be pulled, whether flushing is needed first and the level of reporting. Mobilisation from our Nairobi base is moderate, as the county is a fair distance from Nairobi. Send us your borehole details for a quotation.

What does a camera inspection usually find in Meru?

Most often the open-hole sections, fractured water-bearing zones, collapse of soft tuffs, the casing depth and condition, and the water level.

Does the pump have to be removed?

Usually yes. The pump and riser pipe block the camera. We can pull and reinstall the pump as part of the job. If the pump is stuck, the camera can often be lowered beside it to see how it is jammed.

What if the water is muddy?

The camera needs clear water. A muddy borehole is left to settle or flushed first, which also often improves its yield.

What do I receive after the inspection?

The full video with depth shown, labelled still images, a depth-referenced log, a condition assessment and clear recommendations.

References and further reading

  1. US EPA: borehole video camera (environmental geophysics)
  2. USGS: geophysical and video logging, Idaho National Laboratory
  3. A closer look at southeast regional drinking water wells: identifying problems using a down-well camera (Georgia Tech repository)
  4. SSWM: well development and rehabilitation
  5. Barasa M. et al. (2018). Africa Groundwater Atlas: Hydrogeology of Kenya. British Geological Survey

📹 Is your borehole ready for a camera?

A camera inspection needs clear water and a clear path down the borehole. Answer a few questions to see what preparation is needed and what the inspection will focus on.

0readiness (%)
0preparation steps
0camera cable needed (m)

Book a borehole camera inspection in Meru

Send us the borehole depth, diameter and what you want to find out. We will plan the inspection and send a quotation for the survey and written report, including mobilisation from our Nairobi base.

💬 WhatsApp