Get a Quote

Borehole Pump Installation in Garissa

Borehole pump installation in Garissa: submersible and solar pump sizing, installation, repair and WRA metering in Garissa town and Dadaab. Get a quote.

By Quantum Geoconsultants hydrogeology teamUpdated 16 November 20264 min read
TopsoilSandsClay / shaleSandstone aquiferStatic water level (pump off) Pumping water level ◀ Submersible pump & motor ◀ Screen below the pump Deep, salty: stainless pump

Garissa: deep, often mineralised water in sedimentary rock. The pump sits below the pumping water level and above the screen.

Borehole pump installation in Garissa decides whether your borehole delivers reliable water for years or fails within months. A good pump is chosen from the borehole's test pumping result, the local geology and the water quality. This guide explains submersible pump installation in Garissa, how to choose between solar and electric pumps, and what affects the cost.

How Garissa's geology affects your borehole pump

Groundwater in Garissa's sedimentary basin is often deep, warm and mineralised. Heavy-duty stainless steel submersibles rated for the water temperature last best. The strong sun and high cost of diesel make solar pumping the most economical choice.

In sedimentary basins, water is held in the pores and fractures of sandstones and limestones, often deep, warm and mineralised. Deep settings need long drop cables sized for voltage drop and strong riser pipe. Salty or warm water calls for stainless steel pumps and motors rated for the water temperature.

Don't have a borehole yet? Start with a hydrogeological survey in Garissa, then borehole drilling in Garissa. The test pumping at the end of drilling gives the numbers we need to size your pump.

Types of borehole pumps we install

Solar submersible pumpsRun straight from solar panels through a controller. No fuel or power bills.
AC submersible pumpsSingle-phase or three-phase pumps on grid or generator power, for higher flows and around-the-clock pumping.
Hybrid solar and grid pumpsRun on solar by day and switch to grid or generator power when needed.
Booster pumps and pressure setsGive steady pressure from the tank to taps, showers and upper floors.
Pump replacement and upgradesSwap a failed or undersized pump for one matched to your borehole.
Hand pumpsA simple backup on shallow boreholes for homes, schools and community points.

How we install a submersible pump in Garissa

  1. Review the borehole data: depth, casing size, static water level, pumping water level and safe yield from the test pumping report.
  2. Size the pump: work out the total head (lift plus tank height plus pipe friction) and the flow you need, then choose the pump from the manufacturer's pump curves.
  3. Choose the materials: stainless steel pump and motor, riser pipe, drop cable and fittings suited to the depth and water quality.
  4. Install the pump: lower the pump on its riser pipe with a stainless steel safety rope, set it below the pumping water level and above the screen, and fit a non-return valve.
  5. Fit the controls: solar controller or starter panel, dry-run protection, level probe and a float switch in the tank.
  6. Connect the tank and meter: pipework to the tank on its stand and a water meter, as Water Resources Authority (WRA) permit conditions require abstraction to be measured.
  7. Commission and hand over: test the flow and pressure, check the water level while pumping, seal the wellhead and train you on simple care.

Solar or electric borehole pump in Garissa?

Garissa has strong sunshine for most of the year, which makes solar borehole pumps the cheapest way to pump water. A solar pump has no fuel or power bills, and the tank stores the day's water for the evening and night.

Use our pump size calculator below for a first estimate of the solar array or motor size your borehole needs.

Water quality and pump materials in Garissa

Groundwater in parts of Garissa is salty or mineralised, which corrodes ordinary pumps and fittings. Choose stainless steel pumps, motors and fittings designed for aggressive water, with uPVC or HDPE riser pipe instead of galvanised steel where the depth allows.

Submersible pump installation checklist
  • Pump flow within the tested safe yield
  • Pump set below the pumping water level, never on the borehole floor
  • Motor cooled by water flowing past it (use a flow sleeve if needed)
  • Stainless steel safety rope and properly sized drop cable
  • Dry-run protection and a tank float switch
  • Non-return valve and sealed wellhead
  • Water meter fitted, as WRA requires

Borehole pump repair and maintenance in Garissa

We pull, test, repair and replace borehole pumps. Common problems we fix include:

We work across Garissa, including Garissa town, Dadaab, Masalani, Modogashe, Ijara, Hulugho, Balambala, Bura East.

What does borehole pump installation cost in Garissa?

The cost depends on the pump setting depth and total head, the flow you need, the power source (solar array or grid), the distance and height to the tank and the water quality, which sets the materials. Send us your test pumping report and site details for a quotation.

Frequently asked questions

How much does borehole pump installation cost in Garissa?

It depends on the pump setting depth, the flow needed, solar or grid power, the distance and height to the tank and the water quality. Send us your test pumping report and site details and we will send a quotation.

Which pump is best for a borehole in Garissa?

In much of Garissa, the best choice is a stainless steel submersible pump rated for deep, warm and mineralised water, usually solar. The final choice comes from your borehole's test pumping result and water quality.

Is a solar or electric borehole pump better in Garissa?

Solar is usually the better choice in Garissa. The strong sunshine means a solar pump can deliver the day's water without fuel or power bills. Grid or generator pumps make sense only for very large demands or where water is needed around the clock.

How deep should a submersible pump be installed?

Below the pumping water level measured during test pumping, with a safety margin for seasonal drops, and normally above the screen so water flows past and cools the motor. Never set it on the borehole floor, where it will draw in silt.

Do I need a water meter on my borehole?

Yes. Water Resources Authority permit conditions require borehole owners to measure the water they abstract, and we install a meter with every pump.

References and further reading

  1. Water Resources Authority: water use allocation and permits
  2. Water Resources Regulations, 2021 (Legal Notice 43 of 2021), Kenya Law
  3. Grundfos Ecademy: pump sizing and installation in domestic groundwater applications
  4. Xylem: 5 mistakes when selecting a borehole pump
  5. Energypedia: Solar Pumping Toolkit, guidance and assessment
  6. Global Solar Atlas: solar resource map for Kenya
  7. The Star (2025): WRA warns of rising illegal water abstraction

⚙️ Borehole pump size calculator

Enter your borehole's numbers from the test pumping report (or your best estimate) to see the total head, the flow and roughly how big a submersible pump or solar array you need.

0total head (m)
0pump flow (m³/hour)
0solar array (watts)

Rough planning figures only. Total head = pumping water level + tank height + an allowance for pipe friction. The final pump is chosen from the manufacturer's pump curves, your test pumping yield and your water quality.

Get a borehole pump installation quote in Garissa

Send us your test pumping report, borehole depth and where the tank will sit. We will size the right submersible or solar pump and send a quotation for supply, installation and commissioning.

💬 WhatsApp