A contour survey shows the shape of your land as lines joining points of equal height. It tells your designer at a glance where the ground is steep or flat, where water will flow and how much earth must be moved. Quantum Geoconsultants carries out contour surveys across Kenya using RTK GPS, a total station, an auto level and a survey drone.
What is a contour survey?
A contour survey measures the height of the ground at many points across a site and draws contour lines through points of the same level. Contours that are close together show steep ground, and contours that are far apart show gentle slopes. A contour survey is often part of a wider topographic survey, which also maps buildings, roads, trees and other features.
Choosing the contour interval
The contour interval is the height difference between neighbouring lines. A small interval, such as 0.25 m or 0.5 m, suits building plots and drainage design on gentle ground. A larger interval, such as 1 m or 2 m, suits large farms, estates and hilly land. We agree the interval with you based on the purpose of the survey.
What contour surveys are used for
- Building design: floor levels, foundations and retaining walls
- Roads and access: route selection, gradients, cut and fill
- Drainage and stormwater: flow paths, drains and culverts
- Farm planning and irrigation: terraces, furrows and pipe routes
- Dams, water pans and ponds: storage volume and embankment design
- Estates and land development: plot layout on sloping ground
How we carry out a contour survey
- Control: we set up survey control points tied to a known coordinate system.
- Data capture: we record levels on a grid and along breaks in slope using RTK GPS, a total station or an auto level. On large sites, a survey drone captures the whole surface.
- Processing: the points are turned into a digital terrain model and contours at the agreed interval.
- Drawings: you receive a contour plan with spot levels in AutoCAD (DWG) and PDF.
What affects the cost of a contour survey?
The main factors are the area, the contour interval, the ground cover and access, and whether a drone can be used. Send us your location, the approximate size and the purpose of the survey for a quotation.
Related guides: drone survey in Kenya and construction site survey in Kenya.
Topographic, contour and drone survey guides
Read our guides to topographic, contour, drone and construction site surveys, and what each one gives you.
Frequently asked questions
What is the difference between a contour survey and a topographic survey?
A contour survey focuses on ground levels and the contour lines drawn from them. A topographic survey includes contours as well as buildings, roads, trees, drains and other features on the site.
What contour interval do I need?
Building plots and drainage design usually need a small interval such as 0.25 m or 0.5 m, while large farms and hilly land often use 1 m or 2 m. We recommend an interval based on your project.
Can a drone do a contour survey?
Yes, on open sites a survey drone can capture the ground surface quickly. We check it with ground control points measured by RTK GPS or total station, and use ground methods under trees.
What format will I receive?
You receive a contour plan with spot levels in AutoCAD (DWG) and PDF, and a digital terrain model on request.
📐 Request a topographic survey quote
The cost of a topographic survey depends mainly on the size of the site, the level of detail needed, the ground cover and whether a drone can be used. Tell us about your site and we will recommend a method and send a quotation.
We reply with the recommended method, deliverables and a quotation. Prices are not listed online because every site is different.
Get a topographic survey quote
Send us your site location, its approximate size and what the survey is for. We will recommend ground or drone methods and send a quotation, including mobilisation from our Nairobi base.